Date:
To:
Project:
From:
(Name)
Return Email:
Company:
Phone:
Location:
Return Fax:
Tank Orientation
Tank Configuration
Vertical, on Concrete Pad
Vertical Top or Horizontal Ends
Vertical, on Legs
Flat / Insulated
Flat / Not Insulated
Vertical, on Legs, Cone Bottom
2:1 Elliptical / Insulated
Elliptical / Not Insulated
Cone Height (m)
Vertical Side
Horizontal, on Supports
Insulated or
Partial to (m)
Other
Vertical Bottom / Concrete Pad
Flat / Insulated
Flat / Not Insulated
Tank Specifications
Fluid Specifications
Tank Diameter (m)
Name
Tank Height / Length (m)
Fluid Maintenance Temp (°C)
Wall Material
Fluid Max Exposure Temp (°C)
Carbon Steel
Stainless Steel
Density (kg/m³)
Specify Heat (kJ/kg)
Thermal Conductivity (W/m-°C)
Viscosity (cp)
Expansion Coefficient (1/°C)
Aluminum
FRP
HDPE
LDPE
Polypropylene
PVC
Other Thermal Conductivity
(W/m-°C)
Tank Wall Thickness (mm)
Max Exposure Temp (°C)
Maximum Fluid Height in Tank
m
%
Insulation Specification
Minimum Fluid Height in Tank
m
%
Type
Calcium Silicate
Cellular Glass
Elastomeric Foam
Expanded Pearlite
Fiberglass
Mineral Wool
Polyisocyanurate
Polyurethane
Other
Ambient Conditions
Thickness (mm)
Minimum Ambient Temp (°C)
Thermal Conductivity
Maximum Wind Speed (kph)
(W/m-°C)
Misc. Information
Heater Voltage (Volts)
Tank Heat Loss Safety Factor (%)
Area Classification
Special Conditions
(Keep comments less than 360 characters.)
Output By Thermon
. . .
Bill of Materials
Qty
Unit Price
Total
1.
2.
3.
4.
Ship Via
Total:
Thermon . . . The Heat Tracing Specialists®
For the Thermon office nearest you, visit us at
www.thermon.com
.
FORM # 50702AP (2/05)
