ThermonPrimaryLogo_2017.svg

BFP - Boiler Feed Pump for Steam Boiler Boiler Feed Pump

The Caloritech™ BFP Boiler Feed Pump is designed to augment boiler operation if condensate is not required to be returned to the boiler and mains water pressure is not 10 psig or more above maximum boiler operating pressure. Please note that pump motor is normally powered from a separate source.

Features

  • For applications where condensate is not required to be returned to the boiler mains pressure >10 psig above max. boiler operating pressure.
  • Pump motor is normally powered from a separate source

Specifications

Standard units 0-150 psig; for over 150 psig, please consult your Caloritech™ rep
Standard units suitable for a range of boiler wattages, from 0-990 kW; for use with boilers over 1000 kW, please consult your Caloritech™ rep
Standard 120V or 240V motor voltages available; for use with boiler wattages over 240 kW, voltage must be specified to order
One phase or three phase available
For use with boiler wattages 240 kW or less, suction side piping is 1" NPT; for use with boiler wattages higher than 240 kW, suction side piping is 1 1/4"; all discharge piping is 1" NPT