ThermonPrimaryLogo_2017.svg

Caloritech™ Electronic Indicating Controls Indicating Control

Caloritech™ Electronic Indicating Controls come in 5 different series S100 Series The Caloritech™ S100 Electronic Indicating Control is a low cost, single digital display control that features either T/C or RTD input and either relay or SSR output. C100 Series The Caloritech™ C100 Electronic Indicating Control is a general purpose control with dual digital displays for both process and set point. It features either T/C or RTD input and either relay, SSR pulse, triac driver or 4-20 mA output. D100 Series The Caloritech™ D100 Electronic Indicating Control offers high end process features for applications where a 1/8 or 1/4 DIN control is not appropriate. It features either T/C or RTD input and either relay, SSR pulse or 4-20 mA output. CB100 Series The Caloritech™ CB100 Electronic Indicating Control is a high limit, FM approved control that features manual reset, T/C input and relay output. It is designed for use in conjunction with another process control. UT Series Caloritech™ UT Yokogawa Electronic Indicating Controls are available in 1/4 and 1/8 DIN sizes. Red LED displays show both process and set point. The UT can accept inputs from all thermocouples, RTDs, mV and mA. Outputs can be relay, pulse DC for solid state relays and 4 - 20 mA for step controls and SCRs. Most controls are field configurable to any input and output. Three models are available, please see the Catalog for further details on the corresponding feature sets for each model.

Features

  • Standard DIN sizes
  • Digital display
  • Completely field configurable
  • Provides precise control

Specifications

S100 Series Specific

Single digital display
+/- 0.5% of span accuracy rating
Auto tune
Configurable control modes
Loop break alarm
Optional features include 2 temperature alarms and heater break alarm

C100 Series Specific

+/- 0.5% of span accuracy rating
Auto tune
Configurable control modes
Optional features include loop break alarm, 2 temperature alarms and heater break alarm

D100 Series Specific

+/- 0.3% of span accuracy rating
Auto tune
Fuzzy logic
Configurable control modes
Dual digital display
Loop break alarm
Ramp to set point
Optional features include 2 temperature alarms, heater break alarm, communications, retransmitted output and auxiliary set point

CB100 Series Specific

Dual digital display
T/C, RTD and current voltage inputs; relay output
Optional features include 2 temperature alarms, communications, retransmitted output and remote reset