ThermonPrimaryLogo_2017.svg

Over-The-Side & Bottom Mount Immersion Heaters (DX Series) Immersion Heater

Caloritech™ Over-The-Side Immersion Heaters are available in six different series. DXC Series Caloritech™ DXC Over-The-Side Immersion Heaters feature copper sheathed elements and are typically used for heating water or water solutions that will not corrode copper. They are ideal where easy removal of the heater for cleaning or inspection is required. The DXC is available in single phase or three phase with single element or three element configurations. DXI & DXS Series Caloritech™ DXI Over-The-Side Immersion Heaters feature incoloy® sheathed elements, while the DXS features steel sheathed elements. They are typically used in water rinse tank heating applications where contaminants that would be corrosive to copper are present. They are also suitable for oil based solutions and other chemical solutions that are not corrosive to incoloy® (DXI) or steel (DXS). They are ideal where easy removal of the heater for cleaning or inspection is required. The DXI and DXS are available in single phase or three phase with single element or three element configurations. DXN & DXT Series Caloritech™ DXN and DXT Over-The-Side Immersion Heaters feature high grade inconel® (DXN) or titanium (DXT) sheathed elements and are typically used in liquid heating applications where copper, stainless or incoloy® are unsuitable because the solution being heated would be corrosive to these materials. They are ideal where easy removal of the heater for cleaning or inspection is required. The DXN is available in single phase or three phase with single element or three element configurations and the DXT is available in single phase with single element configuration Caloritech™ Bottom Mount Immersion Heaters are available in six different series. DXLC, DXRC, DXLI & DXRI Series The Caloritech™ DXLC, DXRC, DXLI and DXRI Bottom Mount Immersion Heaters are designed for use in most liquid heating applications. The DXLC & DXRC feature copper sheathed heating elements silver brazed to a welded 304 stainless steel box and riser, while the DXLF & DXRI series contains high density incoloy® sheathed heating elements and steel immersed parts in a fully welded construction. DXLF & DXRF Series The Caloritech™ DXLF and DXRF Bottom Mount Immersion Heaters are designed for use in most liquid heating applications. They feature low density incoloy® sheathed heating elements and steel immersed parts in a fully welded construction.

Features

  • Standard elements available in copper, 304 s.s., Incoloy, Inconel and titanium
  • Easy removal of heaters for cleaning or inspection
  • Multiple rows of elements for higher wattages
  • Explosion proof construction

Specifications

Over-The-Side Immersion Heaters

Available in a range of wattages, from 3 kW to 7.5 kW
Available in a variety of standard voltages from 208V to 600V
Unit weight of 8.8 lbs (4 kg) for the single element unit and 22 lbs (10 kg) for the three element unit
Special wattages, voltages, riser heights and materials available
Multiple rows of elements for higher wattages
Built in thermostat or high limit controllers
4" (102 mm) sludge legs
Passivication for Incoloy® and Stainless Steel
Explosion proof construction
cCSAus approved; EAC Marked

Bottom Mount Immersion Heaters

Standard available voltages range from 208V to 600V, 1 or 3 phase; special voltage available upon custom order
Standard wattages range from 3 kW to 18 kW; special wattage available upon custom order
Standard element lengths range from 12.4" to 51.8" (315 mm to 1316 mm)
Standard watt density ranges from 14 W/in2 to 60 W/in2, depending on wattage and dimensions selected
Special features available upon custom order include multiple rows of elements to increase wattage, built-in thermostat or high limit controller.
4" (102 mm) sludge legs and explosion-proof construction
cCSAus approved; EAC Marked available