ThermonPrimaryLogo_2017.svg

FW - General Industrial Cartridge Filter Housing Housing

The FW Series Cartridge Filter Housing for general industrial applications removes particulates from liquid streams, often as a pre-filter ahead of finer particle separation equipment. The standard design is based upon the single or double open-ended cartridge, but can be adapted to many filter cartridge designs, configurations and sizes. The FW is ideal in applications across a wide range of processing industries, including food and beverage, pharmaceutical, semi-conductor, chemical plants, water treatment and remediation.

Features

  • Appications for wide range of industries
  • Custom housing materials available
  • Custom design pressures up to 3000 psig
  • Easy access enclosure

Specifications

designed to ASME Section VIII Div. 1
single, duplex or multiplex arrangement
150 psig standard design pressure; custom design pressures up to 3000 psig
-20°F/+150°F (-29°C/+66°C) standard design temperature; higher design temperatures available
150lb ANSI RF flanged inlet/outlet nozzles (additional nozzles available as needed); 3000lb NPT couplings for vent, drain and pressure gauge connections; custom flange ratings available
stainless steel standard housings; custom housing materials available
stainless steel cartridge hardware; standard cartridge lengths of 10" (254mm), 20" (508mm), 30" (762mm) and 40" (1016mm) at 10 microns nominal; designed to fit single or double open-ended cartridges; quick access cartridge replacement; custom cartridge configurations, sizes and filter media available
3L Pogo (spring-assisted) headlift on housing diameters 12" to 24" (305mm to 610mm); hydraulic jack headlift on housing diameters over 24" (610mm); housing dimensions under 12" (305mm) utilize handles, not headlifts; optional handwheel or 3L Cantilever headlifts available
standard swing bolt closure; optional thru-bolt closure or patented Easy Access Closure available; O-ring closure seal available in Buna, Viton®, Teflon®, Silicone or EPDM
external primer finish and internal epoxy coating for carbon steel housings; electropolishing and/or passivation of stainless steel housings available; rubber, PVC, PVDF and other internal linings available; paint or coating to customer specifications available
available options include valves, safety relief valves, pressure gauges, steam jackets and working platform